Please wait while the page loads...

Hyundai Veloster Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that small light on your vehicle’s dashboard quickly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also regular as the OBD (on-board computer diagnostic system) in your Veloster. There are hundreds of disparate codes that your check engine light can indicate. While that sounds daunting, with a small patience, tackling preeminent diagnostics will give you cooperative knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, discernable and cooperative vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of functional OBD codes, there are also hundreds of functional reasons for the light, including:

  • Transmission issues
  • Old Battery
  • O2 Sensor
  • Loose Gas Cap or Missing Gas Cap
  • Emissions controls issues
  • Computer output circuit issues
  • Bad Spark Plugs
  • Ignition system faults
  • Fuel and air metering systems problems

This is why it is important for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out instantly by a certified Hyundai mechanic. If the engine light comes on due to a risky concern, you risk damaging your vehicle further by not repairing the issue right away. Call Coggin Deland Hyundai at 3862100263 today or schedule your check engine light service online today!

What Does the Check Engine Light Mean?

One of the most typically misunderstood lights or indicators in your Hyundai Veloster is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in assorted discrete ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your Hyundai Veloster. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name several. With that being said, the check engine light can indicate a mixture of precise things. It can be as authentic as your gas cap being loose or as precarious as engine knocking. If your check engine light is on in your Hyundai Veloster, contact Coggin Deland Hyundai. Our Hyundai service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Coggin Deland Hyundai today!

Check Engine Light Service Hyundai Veloster

What do you do when you’re driving along in your Hyundai Veloster and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t indicate you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your Hyundai Veloster checked as soon as likely. Ignoring that warning could end up causing confident damage to expensive engine components.

When your Hyundai Veloster's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electrical control system that it can’t suitable, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Hyundai auto repair mechanics at Coggin Deland Hyundai. There are also a number of rather low-priced code readers that are designed for do-it-yourselfers, should you suggest that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an skilled professional to suggest the issue and repair it.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more severe failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it good to get the good code reading and diagnosis. The intermediate cost for a check engine light diagnosis & testing is constantly between $88 and $111. The good news, Coggin Deland Hyundai offers complimentary multi-point inspections and free diagnostics, in most cases, to help mean the cause of your check engine light.

Is it safe to drive your Hyundai Veloster with the check engine light on?

This question is not exceedingly effortless because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is typically indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more competent problem. If the check engine light is blinking, this means that there is a competent issue and it is recommended to service your Hyundai Veloster quickly. Call the advisors at Coggin Deland Hyundai by dialing 3862100263 so you can describe the issues. Or reduce your speed and bring your Hyundai to our certified mechanics as soon as achievable.

Will the check engine light reset itself?

The check engine light on your Hyundai Veloster will constantly shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going essential, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your Hyundai Veloster light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Coggin Deland Hyundai so the light and code can be double-checked and reset.

How many miles can you drive with the check engine light?

It could be anything from a damaging sensor to plug wires needing to be replaced. Since every check engine code has its own level of severity, it is laborious to predict how frequent miles you can drive with the warning light on. If you check engine light is flashing, we endorse that you pull over and contact Coggin Deland Hyundai to help embrace if your vehicle is protected to drive in or if we endorse a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly.

Hyundai Veloster Check Engine Light Flashing

Although there are innumerable ability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several simple causes including something as simple as a loose gas cap. Substitute simple reasons for a Check Engine Light are dirty mass airflow sensor, a malfunction with the fuel injection system, damaged oxygen sensor, faulty emissions control part, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as imperative to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every Hyundai Veloster was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its hard systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what strictly is awry nor what to do about it. That’s where we come in; Coggin Deland Hyundai provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extremely Qualified Service professional.

Hyundai Veloster Check Engine Light

If the check engine light in your Hyundai Veloster starts flashing, that means that the problem needs immediate attention and your Hyundai should be brought in now. A flashing light indicates that the problem is perilous and if not taken care of now may result in colossal damage to the vehicle. This shining light usually illustrates a serious engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can promptly raise the temperature of the catalytic converter to a point where damage is feasible, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A bad, historic or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive experts at Coggin Deland Hyundai swiftly by calling 3862100263. If the problem is ignored or you continue to commute, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very pricey repair.

What could cause the check engine light to come on in a Hyundai Veloster?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a rigorous problem that could cause rigorous damage to your engine and come with a major repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow consistently means something less rigorous but a blinking check engine light indicates that your vehicle’s engine is in rigorous trouble and service is needed straightaway. If your check engine light is blinking in your Hyundai Veloster, we extraordinarily suggest not to drive the vehicle and schedule Hyundai service today. Below is a list of the most accepted reasons your check engine light can come on:

  • The battery is low or dead. The battery in your Hyundai Veloster is each marvelous. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Hyundai you drive, but check our fitting service coupons and specials.
  • Your mass airflow sensor (known as MAF) needs to be replenished. The mass airflow sensor in your Hyundai Veloster is what determines how much fuel is fundamental to run your engine efficiently by measuring the reward of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to big changes, like altitude. If your Hyundai Veloster is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or additional item can wreak havoc on your Hyundai Veloster if it’s not installed appropriately. These aftermarket parts and accessories can ditch the battery, trigger the check engine light, or even prevent the car from starting. If these issues sound receptive, transport your Veloster to Hyundai and have our department of certified technicians ensure that your aftermarket items were installed well and aren't causing any issue. Getting accessories, remarkably aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your Hyundai Veloster has a vacuum leak. Each Hyundai Veloster has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, remarkably if they’re exposed to intense heat or extreme cold.
  • Your O2 Sensor (Oxygen Sensor) needs to be replenished. The Oxygen sensor, known as the O2 sensor, measures the reward of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your car will be less legitimate when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your Hyundai Veloster's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the right assortment of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • New Spark Plugs or Plug Wires are fundamental for your Hyundai Veloster. The spark plugs are the part of your engine that ignites the air/fuel assortment in the combustion chamber of your car. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, large to more expensive repairs.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your Hyundai Veloster’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Coggin Deland Hyundai offers a complimentary multi-point inspection with each Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your Hyundai Veloster will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause additional problems from overheating.
  • One of the most understandable and frequent cause is that your Hyundai Veloster gas cap is loose, damaged or missing. The gas cap for your Hyundai Veloster serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on urgently after you put gas in your Hyundai Veloster, first thing you should check is to make convinced the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.