2019 Hyundai Santa Fe Check Engine Light

Check Engine Light Service 2019 Hyundai Santa Fe

What do you do when you’re driving along in your Hyundai Santa Fe and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2019 Hyundai Santa Fe checked as soon as attainable. Ignoring that warning could end up causing considerable damage to pricey engine components.

When your 2019 Hyundai Santa Fe's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t decent, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Hyundai auto repair mechanics at Coggin Deland Hyundai. There are also a number of somewhat honorable code readers that are designed for do-it-yourselfers, should you determine that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an trained compelling to determine the issue and repair it.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is ordinarily between $88 and $111. The exceptional news, Coggin Deland Hyundai offers complimentary multi-point inspections and free diagnostics, in most cases, to assist determine the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not perfectly tightened to a more risky failure like a combative catalytic converter or a problem with one of the car's oxygen sensors, so it exceptional to get the good code reading and diagnosis.

2019 Hyundai Santa Fe Check Engine Light

A flashing light indicates that the problem is precarious and if not taken care of rapidly may result in mighty damage to the vehicle. If the check engine light in your 2019 Hyundai Santa Fe starts flashing, that means that the problem needs speedy attention and your Hyundai should be brought in rapidly. This blinking light regularly hints a harsh engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can immediately boost the temperature of the catalytic converter to a point where wear and tear is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can explicitly be the cause. A damaging, erstwhile or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive experts at Coggin Deland Hyundai suddenly by calling 3862100263. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

Is it safe to drive your 2019 Hyundai Santa Fe with the check engine light on?

This question is not very easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is typically indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more accessible problem. If the check engine light is blinking, this means that there is a accessible issue and it is recommended to service your Hyundai Santa Fe rapidly. Call the experts at Coggin Deland Hyundai by dialing 3862100263 so you can describe the issues. Or reduce your speed and bring your 2019 Hyundai to our certified mechanics as soon as attainable.

What could cause the check engine light to come on in a 2019 Hyundai Santa Fe?

When your check engine light comes on, this could be as authentic as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a harsh problem that could cause harsh damage to your engine and come with a enormous repair bill. Depending on your make and model, the check engine light will illuminate or blink. A functional glow frequently means something less harsh but a flashing check engine light implies that your vehicle’s engine is in harsh trouble and service is mandatory immediately. If your check engine light is flashing in your 2019 Hyundai Santa Fe, we greatly suggest not to drive the vehicle and schedule Hyundai service straightaway. Below is a list of the most authentic reasons your check engine light can come on:

• Your O2 Sensor (Oxygen Sensor) needs to be replenished. The Oxygen sensor, noted as the O2 sensor, measures the fee of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less factual when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2019 Hyundai Santa Fe's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to mean the noble collection of air and fuel that enters the cylinders in your engine. A intrusive O2 sensor can also cause a car to fail an emissions test.
• Your 2019 Hyundai Santa Fe has a vacuum leak. Each Hyundai Santa Fe has a vacuum system that performs a wide collection of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, particularly if they’re exposed to profound heat or extreme cool.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or contrasting item can wreak havoc on your 2019 Hyundai Santa Fe if it’s not installed accurately. These aftermarket parts and accessories can dump the battery, trigger the check engine light, or even avoid the vehicle from starting. If these issues sound modern, bring your Santa Fe to Hyundai and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, particularly aftermarket parts and accessories, or using OEM parts first place might cost some bit more but could save you money from having to get scanty work and damage caused by scanty installation work corrected.
• Your catalytic converter is intrusive or going intrusive. The catalytic converter is a part of your 2019 Hyundai Santa Fe’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is normally caused by neglected maintenance, which is why Coggin Deland Hyundai offers a complimentary multi-point inspection with each Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your 2019 Hyundai Santa Fe will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause contrasting problems from overheating.
• The battery is low or dead. The battery in your 2019 Hyundai Santa Fe is each important. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't certainly require maintenance. The estimate of a new one depends on the type of Hyundai you drive, but check our commonplace service coupons and specials.
• One of the most noted and frequent cause is that your 2019 Hyundai Santa Fe gas cap is loose, damaged or missing. The gas cap for your 2019 Hyundai Santa Fe serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a intrusive fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't costly. If your check engine light turns on abruptly after you put gas in your 2019 Hyundai Santa Fe, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• New Spark Plugs or Plug Wires are decisive for your 2019 Hyundai Santa Fe. The spark plugs are the part of your engine that ignites the air/fuel collection in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are intrusive or old, you will experience scanty performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, leading to more costly repairs.
• Your mass airflow sensor (known as MAF) needs to be replenished. The mass airflow sensor in your Hyundai Santa Fe is what determines how much fuel is decisive to run your engine efficiently by measuring the fee of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to acknowledged changes, like altitude. If your Hyundai Santa Fe is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a intrusive mass airflow sensor.

Will the check engine light reset itself?

The check engine light on your 2019 Hyundai Santa Fe will usually shut itself off if the issue or code that caused it to turn on is serviced. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did several of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2019 Hyundai Santa Fe light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Coggin Deland Hyundai so the light and code can be double-checked and reset.

2019 Hyundai Santa Fe Check Engine Light Flashing

Although there are frequent feasible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are copious natural causes including something as easy as a loose gas cap. Other natural reasons for a Check Engine Light are faulty head gasket, faulty emissions control part, dirty mass airflow sensor, a malfunction with the fuel injection system, damaged oxygen sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as imperative to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2019 Hyundai Santa Fe was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its critical systems. The sensors are ordinarily detecting conditions while sending data to the computerized control unit. If the computerized control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what entirely is incorrect nor what to do about it. That’s where we come in; Coggin Deland Hyundai provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Immensely Qualified Service high-tech.

2019 Hyundai Santa Fe Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that scant light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear modest away. If you hear the term, diagnostic trouble codes (DTC), these are just supplemental name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Santa Fe. There are hundreds of disparate codes that your check engine light can represent. While that sounds daunting, with a scant patience, tackling mandatory diagnostics will give you useful knowledge about your vehicle and will also allow that Check Engine Light to do what it is truly supposed to do: be your guide. Unfortunately, apparent and useful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of usable OBD codes, there are also hundreds of usable reasons for the light, including:

• Loose Gas Cap or Missing Gas Cap
• Emissions controls issues
• O2 Sensor
• Transmission issues
• Computer output circuit issues
• Fuel and air metering systems problems
• Ignition system faults
• Bad Spark Plugs
• Old Battery

This is why it is adequate for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out swiftly by a certified Hyundai mechanic. If the engine light comes on due to a curious concern, you risk destructive your car further by not repairing the issue right away. Call Coggin Deland Hyundai at 3862100263 straightaway or schedule your check engine light service online today!

What Does the Check Engine Light Mean?

One of the most usually misunderstood lights or indicators in your 2019 Hyundai Santa Fe is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few contrasting ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2019 Hyundai Santa Fe. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can designate a variety of disparate things. It can be as classic as your gas cap being loose or as serious as engine knocking. If your check engine light is on in your 2019 Hyundai Santa Fe, contact Coggin Deland Hyundai. Contact Coggin Deland Hyundai today! Our Hyundai service department can help you find out what code is turning your check engine light on or investigate why your check engine light is flashing.

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is troublesome to predict how bountiful miles you can drive with the warning light on. If you check engine light is flashing, we advise that you pull over and contact Coggin Deland Hyundai to help embrace if your vehicle is safe to drive in or if we advise a tow truck. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly.