Check Engine Light Service 2018 Hyundai Tucson

What do you do when you’re driving along in your Hyundai Tucson and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks some because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2018 Hyundai Tucson checked as soon as obvious. Ignoring that warning could end up causing primary damage to expensive engine components.

When your 2018 Hyundai Tucson's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t decent, a computer turns on your check engine light. This amber or yellow light is generally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is designate with an computerized investigate tool that is used by our Hyundai auto repair mechanics at Coggin Deland Hyundai. There are also a number of somewhat inexpensive code readers that are designed for do-it-yourselfers, should you determine that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an licensed competent to indicate the issue and repair it.

Will the check engine light reset itself?

The check engine light on your 2018 Hyundai Tucson will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going fair, and you did various of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2018 Hyundai Tucson light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to transport it in to Coggin Deland Hyundai so the light and code can be double-checked and reset.

2018 Hyundai Tucson Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard urgently illuminates, but in reality, it is not something that should cause you to shut down in fear prudent away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also prominent as the OBD (on-board computer diagnostic system) in your Tucson. There are hundreds of different codes that your check engine light can indicate. While that sounds daunting, with a little patience, tackling decisive diagnostics will give you fitting knowledge about your automobile and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, detectable and helpful automobile symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of potential OBD codes, there are also hundreds of potential reasons for the light, including:

• Emissions controls issues
• Transmission issues
• O2 Sensor
• Computer output circuit issues
• Ignition system faults
• Fuel and air metering systems problems
• Old Battery
• Loose Gas Cap or Missing Gas Cap
• Bad Spark Plugs

This is why it is main for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out suddenly by a certified Hyundai mechanic. If the engine light comes on due to a adequate concern, you risk harmful your car distinctive by not repairing the issue noble away. Call Coggin Deland Hyundai at 3862100263 today or schedule your check engine light service online today!

How much does it cost to get the engine light checked?

The average estimate for a check engine light diagnosis & testing is mostly between $88 and $111. The essential news, Coggin Deland Hyundai offers complimentary multi-point inspections and free diagnostics, in most cases, to help find out the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more unhealthy failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it essential to get the lawful code reading and diagnosis.

Is it safe to drive your 2018 Hyundai Tucson with the check engine light on?

If the check engine light is glaring, this means that there is a unhealthy issue and it is recommended to service your Hyundai Tucson suddenly. This question is not exceedingly uncomplicated because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be reliable to travel to work. This is naturally indicated by a steady glow of the check engine light. If you notice a difference in the performance of the automobile, it could be an indication of a more unhealthy problem. Call the mentors at Coggin Deland Hyundai by dialing 3862100263 so you can describe the issues. Or reduce your speed and bring your 2018 Hyundai to our certified mechanics as soon as possible.

What could cause the check engine light to come on in a 2018 Hyundai Tucson?

When your check engine light comes on, this could be as natural as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a precarious problem that could cause precarious damage to your engine and come with a exceptional repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow frequently means something less precarious but a twinkling check engine light indicates that your vehicle’s engine is in precarious trouble and service is imperative instantly. If your check engine light is twinkling in your 2018 Hyundai Tucson, we exceedingly recommend not to drive the vehicle and schedule Hyundai service today. Below is a list of the most noted reasons your check engine light can come on:

• One of the most commonplace and frequent cause is that your 2018 Hyundai Tucson gas cap is loose, damaged or missing. The gas cap for your 2018 Hyundai Tucson serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a detrimental fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't fancy. If your check engine light turns on expeditiously after you put gas in your 2018 Hyundai Tucson, earliest thing you should check is to make confident the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• The battery is low or dead. The battery in your 2018 Hyundai Tucson is every awesome. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Hyundai you drive, but check our current service coupons and specials.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the discharge of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less productive when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2018 Hyundai Tucson's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to advocate the decent mixture of air and fuel that enters the cylinders in your engine. A detrimental O2 sensor can also cause a car to fail an emissions test.
• Issues with each aftermarket items. An aftermarket alarm, exhaust or divergent item can wreak havoc on your 2018 Hyundai Tucson if it’s not installed correctly. These aftermarket parts and accessories can dump the battery, trigger the check engine light, or even avoid the vehicle from starting. If these issues sound amiable, bring your Tucson to Hyundai and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing each issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts earliest place might cost some bit more but could save you money from having to get meager work and damage caused by meager installation work corrected.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Tucson is what determines how much fuel is needed to run your engine efficiently by measuring the discharge of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to actual changes, like altitude. If your Hyundai Tucson is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a detrimental mass airflow sensor.
• New Spark Plugs or Plug Wires are needed for your 2018 Hyundai Tucson. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are detrimental or old, you will experience meager performance and reduced power. In a few extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, large to more fancy repairs.
• Your 2018 Hyundai Tucson has a vacuum leak. Every Hyundai Tucson has a vacuum system that performs a expansive variety of functions. The vacuum system also helps cut down down detrimental emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to energetic heat or extreme bitter.
• Your catalytic converter is detrimental or going detrimental. The catalytic converter is a part of your 2018 Hyundai Tucson’s exhaust system. The catalytic converter's work is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is frequently caused by neglected maintenance, which is why Coggin Deland Hyundai offers a complimentary multi-point inspection with every Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your 2018 Hyundai Tucson will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause divergent problems from overheating.

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is difficult to predict how several miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is flashing, we recommend that you pull over and contact Coggin Deland Hyundai to help represent if your car is safe to drive in or if we recommend a tow truck. It could be anything from a bad sensor to plug wires needing to be replaced.

2018 Hyundai Tucson Check Engine Light

If the check engine light in your 2018 Hyundai Tucson starts flashing, that means that the problem needs sudden attention and your Hyundai should be brought in at this moment. A flashing light indicates that the problem is unhealthy and if not taken care of at this moment may result in enormous damage to the vehicle. This blinking light commonly indicates a relentless engine misfire allowing unburned fuel to be discharged into the exhaust system. There it can suddenly hike the temperature of the catalytic converter to a point where break is conceivable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can definitely be the cause. A bad, aged or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very fancy repair. If your check engine light is glaring, please contact our team of automotive experts at Coggin Deland Hyundai abruptly by calling 3862100263.

2018 Hyundai Tucson Check Engine Light Flashing

Although there are countless achievable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are copious commonplace causes including something as discernable as a loose gas cap. Distinct commonplace reasons for a Check Engine Light are damaged oxygen sensor, a malfunction with the fuel injection system, faulty emissions control part, faulty head gasket, dirty mass airflow sensor, or defective spark plugs to name assorted. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2018 Hyundai Tucson was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its troublesome systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is erroneous nor what to do about it. That’s where we come in; Coggin Deland Hyundai provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extraordinarily Qualified Service trained.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2018 Hyundai Tucson is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in numerous assorted ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light lights up in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a variety of things for your 2018 Hyundai Tucson. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can illustrate a variety of different things. It can be as coherent as your gas cap being loose or as exacting as engine knocking. If your check engine light is on in your 2018 Hyundai Tucson, contact Coggin Deland Hyundai. Our Hyundai service department can help you find out what code is turning your check engine light on or audit why your check engine light is flashing. Contact Coggin Deland Hyundai today!