2018 Hyundai Kona Check Engine Light

Check Engine Light Service 2018 Hyundai Kona

What do you do when you’re driving along in your Hyundai Kona and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a tiny because you have tiny idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the vehicle over to the side of the road and call a tow truck, but it is recommended that you get your 2018 Hyundai Kona checked as soon as feasible. Ignoring that warning could end up causing considerable wear and tear to expensive engine parts.

When your 2018 Hyundai Kona's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the computerized control system that it can’t honorable, a computer turns on your check engine light. This amber or yellow light is frequently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is learn with an electronic probe tool that is used by our Hyundai auto repair mechanics at Coggin Deland Hyundai. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you represent that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an effective expert to represent the issue and repair it.

2018 Hyundai Kona Check Engine Light Flashing

Although there are countless possible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are countless natural causes including something as simple as a loose gas cap. Contrasting natural reasons for a Check Engine Light are faulty emissions control part, faulty head gasket, dirty mass airflow sensor, damaged oxygen sensor, a malfunction with the fuel injection system, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as imperative to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2018 Hyundai Kona was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its stern systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is guilty nor what to do about it. That’s where we come in; Coggin Deland Hyundai provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service licensed.

What could cause the check engine light to come on in a 2018 Hyundai Kona?

When your check engine light comes on, this could be as classic as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a draconian problem that could cause draconian break to your engine and come with a substantial repair bill. Depending on your make and model, the check engine light will illuminate or blink. A persistent glow commonly means something fewer draconian but a flashing check engine light hints that your vehicle’s engine is in draconian trouble and service is needed urgently. If your check engine light is flashing in your 2018 Hyundai Kona, we extraordinarily represent not to drive the automobile and schedule Hyundai service today. Below is a list of the most famous reasons your check engine light can come on:

• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Kona is what determines how much fuel is decisive to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to crucial changes, like altitude. If your Hyundai Kona is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a detrimental mass airflow sensor.
• Issues with each aftermarket items. An aftermarket alarm, exhaust or additional item can wreak havoc on your 2018 Hyundai Kona if it’s not installed accurately. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even avert the vehicle from starting. If these issues sound established, bring your Kona to Hyundai and have our team of certified mechanics ensure that your aftermarket items were installed properly and aren't causing each issue. Getting accessories, highly aftermarket parts and accessories, or using OEM parts original place might cost a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
• Your 2018 Hyundai Kona has a vacuum leak. Every Hyundai Kona has a vacuum system that performs a expanded assortment of functions. The vacuum system also helps lower detrimental emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can barren out and crack, highly if they’re exposed to important heat or extreme cold.
• New Spark Plugs or Plug Wires are decisive for your 2018 Hyundai Kona. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires bring the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are detrimental or erstwhile, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, first-rate to more fancy repairs.
• Your catalytic converter is detrimental or going detrimental. The catalytic converter is a part of your 2018 Hyundai Kona’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is commonly caused by neglected maintenance, which is why Coggin Deland Hyundai offers a complimentary multi-point inspection with every Hyundai service. If you have an issue with your catalytic converter and don't get it fixed, your 2018 Hyundai Kona will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause additional problems from overheating.
• One of the most commonplace and frequent cause is that your 2018 Hyundai Kona gas cap is loose, damaged or missing. The gas cap for your 2018 Hyundai Kona serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a detrimental fuel cap? If your gas cap is erstwhile or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't fancy. If your check engine light turns on abruptly after you put gas in your 2018 Hyundai Kona, original thing you should check is to make satisfied the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• The battery is low or dead. The battery in your 2018 Hyundai Kona is every compelling. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't precisely require maintenance. The price of a new one depends on the type of Hyundai you drive, but check our logical service coupons and specials.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be fewer efficient when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2018 Hyundai Kona's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to find out the proper mixture of air and fuel that enters the cylinders in your engine. A detrimental O2 sensor can also cause a car to fail an emissions test.

Will the check engine light reset itself?

The check engine light on your 2018 Hyundai Kona will often shut itself off if the issue or code that caused it to turn on is revamped. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going fair, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2018 Hyundai Kona light will go off after about 20-40 miles. If you drive over that payment and the light is still on, you will need to bring it in to Coggin Deland Hyundai so the light and code can be double-checked and reset.

Is it safe to drive your 2018 Hyundai Kona with the check engine light on?

This question is not very easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is naturally indicated by a innate glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more perilous problem. If the check engine light is glaring, this means that there is a perilous issue and it is recommended to service your Hyundai Kona expeditiously. Call the advisors at Coggin Deland Hyundai by dialing 3862100263 so you can describe the issues. Or cut down your speed and bring your 2018 Hyundai to our certified mechanics as soon as potential.

2018 Hyundai Kona Check Engine Light

If the check engine light in your 2018 Hyundai Kona starts flashing, that means that the problem needs precipitous attention and your Hyundai should be brought in instantly. A flashing light hints that the problem is hazardous and if not taken care of instantly may result in important break to the car. This blinking light usually expresses a productive engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can quickly raise the temperature of the catalytic converter to a point where damage is conceivable, requiring an pricey repair. A Bit owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a notably lavish repair. If your check engine light is flashing, please contact our team of automotive experts at Coggin Deland Hyundai immediately by calling 3862100263.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more unhealthy failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it honest to get the correct code reading and diagnosis. The average cost for a check engine light diagnosis & testing is consistently between $88 and $111. The honest news, Coggin Deland Hyundai offers complimentary multi-point inspections and free diagnostics, in most cases, to help pick the cause of your check engine light.

2018 Hyundai Kona Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that miniature light on your vehicle’s dashboard immediately brightens, but in reality, it is not something that should cause you to shut down in fear noble away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Kona. There are hundreds of different codes that your check engine light can mean. While that sounds daunting, with a miniature patience, tackling helpful diagnostics will give you favorable knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, discernable and noteworthy vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of cooperative OBD codes, there are also hundreds of cooperative reasons for the light, including:

• Computer output circuit issues
• Loose Gas Cap or Missing Gas Cap
• Emissions controls issues
• Bad Spark Plugs
• O2 Sensor
• Ignition system faults
• Fuel and air metering systems problems
• Old Battery
• Transmission issues

This is why it is exciting for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out abruptly by a certified Hyundai mechanic. If the engine light comes on due to a harsh concern, you risk bad your car disparate by not repairing the issue polite away. Call Coggin Deland Hyundai at 3862100263 today or schedule your check engine light service online today!

What Does the Check Engine Light Mean?

One of the most mostly misunderstood lights or indicators in your 2018 Hyundai Kona is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a miniature contrasting ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2018 Hyundai Kona. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can indicate a collection of divergent things. It can be as straightforward as your gas cap being loose or as hazardous as engine knocking. If your check engine light is on in your 2018 Hyundai Kona, contact Coggin Deland Hyundai. Contact Coggin Deland Hyundai today! Our Hyundai service department can help you find out what code is turning your check engine light on or audit why your check engine light is glaring.

How many miles can you drive with the check engine light?

If you check engine light is glaring, we recommend that you pull over and contact Coggin Deland Hyundai to help indicate if your vehicle is reliable to drive in or if we recommend a tow truck. Since each check engine code has its own level of severity, it is difficult to predict how copious miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy subsequently.