2017 Hyundai Santa Fe Check Engine Light

Is it safe to drive your 2017 Hyundai Santa Fe with the check engine light on?

If the check engine light is flashing, this means that there is a unhealthy issue and it is recommended to service your Hyundai Santa Fe immediately. This question is not very plain because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be dependable to drive. This is typically indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more unhealthy problem. Call the experts at Coggin Deland Hyundai by dialing 3862100263 so you can describe the issues. Or reduce your speed and bring your 2017 Hyundai to our certified mechanics as soon as conceivable.

Check Engine Light Service 2017 Hyundai Santa Fe

What do you do when you’re driving along in your Hyundai Santa Fe and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a few because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2017 Hyundai Santa Fe checked as soon as handy. Ignoring that warning could end up causing big damage to expensive engine components.

When your 2017 Hyundai Santa Fe's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t correct, a computer turns on your check engine light. This amber or yellow light is frequently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Hyundai auto repair mechanics at Coggin Deland Hyundai. There are also a number of comparably inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced experienced to suggest the issue and repair it.

2017 Hyundai Santa Fe Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard abruptly illuminates, but in reality, it is not something that should cause you to shut down in fear noble away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also well-known as the OBD (on-board computer diagnostic system) in your Santa Fe. There are hundreds of diversified codes that your check engine light can imply. While that sounds daunting, with a little patience, tackling primary diagnostics will give you convenient knowledge about your car and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, practical and accurate car symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of likely OBD codes, there are also hundreds of likely reasons for the light, including:

• Computer output circuit issues
• Ignition system faults
• Loose Gas Cap or Missing Gas Cap
• Fuel and air metering systems problems
• Transmission issues
• O2 Sensor
• Emissions controls issues
• Old Battery
• Bad Spark Plugs

This is why it is significant for someone who does not have several of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out instantly by a certified Hyundai mechanic. If the engine light comes on due to a precarious concern, you risk damaging your car added by not repairing the issue honest away. Call Coggin Deland Hyundai at 3862100263 today or schedule your check engine light service online today!

What Does the Check Engine Light Mean?

One of the most generally misunderstood lights or indicators in your 2017 Hyundai Santa Fe is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in some contrasting ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a variety of things for your 2017 Hyundai Santa Fe. Some of these include controlling engine speed, shifting automatic transmissions ignition timing, and implementing stability control, just to name some. With that being said, the check engine light can mean a variety of different things. It can be as effortless as your gas cap being loose or as threatening as engine knocking. If your check engine light is on in your 2017 Hyundai Santa Fe, contact Coggin Deland Hyundai. Our Hyundai service department can aid you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Coggin Deland Hyundai today!

How much does it cost to get the engine light checked?

The average value for a check engine light diagnosis & testing is usually between $88 and $111. The marvelous news, Coggin Deland Hyundai offers complimentary multi-point inspections and free diagnostics, in most cases, to help mean the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more perilous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it marvelous to get the suitable code reading and diagnosis.

Will the check engine light reset itself?

The check engine light on your 2017 Hyundai Santa Fe will usually shut itself off if the issue or code that caused it to turn on is repaired. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going authentic, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2017 Hyundai Santa Fe light will go off after about 20-40 miles. If you drive over that sum and the light is still on, you will need to bring it in to Coggin Deland Hyundai so the light and code can be double-checked and reset.

2017 Hyundai Santa Fe Check Engine Light Flashing

Although there are bountiful capability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are bountiful classic causes consisting something as classic as a loose gas cap. Other classic reasons for a Check Engine Light are faulty emissions control part, damaged oxygen sensor, a malfunction with the fuel injection system, faulty head gasket, dirty mass airflow sensor, or defective spark plugs to name various. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as crucial to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2017 Hyundai Santa Fe was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its extensive systems. The sensors are generally detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what precisely is amiss nor what to do about it. That’s where we come in; Coggin Deland Hyundai provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Remarkably Qualified Service trained.

2017 Hyundai Santa Fe Check Engine Light

A glaring light indicates that the problem is active and if not taken care of hastily may result in leading damage to the vehicle. If the check engine light in your 2017 Hyundai Santa Fe starts glaring, that means that the problem needs immediate attention and your Hyundai should be brought in hastily. This blinking light usually indicates a rigid engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can rapidly increase the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can actually be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is flashing, please contact our team of automotive experts at Coggin Deland Hyundai urgently by calling 3862100263.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we express that you pull over and contact Coggin Deland Hyundai to help determine if your car is safe to drive in or if we express a tow truck. Since each check engine code has its own level of severity, it is hard to predict how many miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly.

What could cause the check engine light to come on in a 2017 Hyundai Santa Fe?

When your check engine light comes on, this could be as pure as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a alarming problem that could cause alarming damage to your engine and come with a great repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow continually means something less alarming but a flashing check engine light indicates that your vehicle’s engine is in alarming trouble and service is basic urgently. If your check engine light is flashing in your 2017 Hyundai Santa Fe, we remarkably recommend not to drive the vehicle and schedule Hyundai service today. Below is a list of the most usual reasons your check engine light can come on:

• Your catalytic converter is damaging or going damaging. The catalytic converter is a part of your 2017 Hyundai Santa Fe’s exhaust system. The catalytic converter's work is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is commonly caused by neglected maintenance, which is why Coggin Deland Hyundai offers a complimentary multi-point inspection with every Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your 2017 Hyundai Santa Fe will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause distinct problems from overheating.
• Your 2017 Hyundai Santa Fe has a vacuum leak. Every Hyundai Santa Fe has a vacuum system that performs a wide variety of functions. The vacuum system also helps lessen harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to exciting heat or extreme cold.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Santa Fe is what determines how much fuel is fundamental to run your engine efficiently by measuring the reward of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to particular changes, like altitude. If your Hyundai Santa Fe is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a damaging mass airflow sensor.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or distinct item can wreak havoc on your 2017 Hyundai Santa Fe if it’s not installed appropriately. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound famous, bring your Santa Fe to Hyundai and have our team of certified mechanics ensure that your aftermarket items were installed appropriately and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts initial place might cost a miniature bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, admitted as the O2 sensor, measures the reward of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less efficient when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2017 Hyundai Santa Fe's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to favor the right variety of air and fuel that enters the cylinders in your engine. A damaging O2 sensor can also cause a vehicle to fail an emissions test.
• The battery is low or dead. The battery in your 2017 Hyundai Santa Fe is every crucial. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a few decades ago, and they don't genuinely require maintenance. The price of a new one depends on the type of Hyundai you commute, but check our prevalent service coupons and specials.
• One of the most prevalent and copious cause is that your 2017 Hyundai Santa Fe gas cap is loose, damaged or missing. The gas cap for your 2017 Hyundai Santa Fe serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a damaging fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't fancy. If your check engine light turns on rapidly after you put gas in your 2017 Hyundai Santa Fe, initial thing you should check is to make convinced the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• New Spark Plugs or Plug Wires are fundamental for your 2017 Hyundai Santa Fe. The spark plugs are the part of your engine that ignites the air/fuel variety in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are damaging or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, major to more fancy repairs.