2016 Hyundai Santa Fe Check Engine Light

How many miles can you drive with the check engine light?

If you check engine light is flashing, we recommend that you pull over and contact Coggin Deland Hyundai to help determine if your vehicle is safe to drive in or if we recommend a tow truck. It could be anything from a bad sensor to plug wires needing to be replaced. Since each check engine code has its own level of severity, it is hard to predict how many miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly.

2016 Hyundai Santa Fe Check Engine Light

If the check engine light in your 2016 Hyundai Santa Fe starts twinkling, that means that the problem needs hasty attention and your Hyundai should be brought in expeditiously. A twinkling light indicates that the problem is risky and if not taken care of expeditiously may result in effective damage to the vehicle. This blinking light frequently indicates a rigid engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can quickly increase the temperature of the catalytic converter to a point where damage is attainable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A bad, erstwhile or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a largely expensive repair. If your check engine light is flashing, please contact our unit of automotive consultants at Coggin Deland Hyundai abruptly by calling 3862100263.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more risky failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it honest to get the contractual code reading and diagnosis. The central cost for a check engine light diagnosis & testing is frequently between $88 and $111. The honest news, Coggin Deland Hyundai offers complimentary multi-point inspections and free diagnostics, in most cases, to help indicate the cause of your check engine light.

Check Engine Light Service 2016 Hyundai Santa Fe

What do you do when you’re driving along in your Hyundai Santa Fe and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t recommend you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Hyundai Santa Fe checked as soon as efficient. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2016 Hyundai Santa Fe's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t realistic, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an computerized inspect tool that is used by our Hyundai auto repair technicians at Coggin Deland Hyundai. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you pick that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an skilled high-tech to read the issue and repair it.

Is it safe to drive your 2016 Hyundai Santa Fe with the check engine light on?

If the check engine light is flashing, this means that there is a risky issue and it is recommended to service your Hyundai Santa Fe shortly. This question is not excessively accepted because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be protected to drive. This is typically indicated by a persistent glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more dangerous problem. Call the mentors at Coggin Deland Hyundai by dialing 3862100263 so you can describe the issues. Or reduce your speed and deliver your 2016 Hyundai to our certified mechanics as soon as cooperative.

Will the check engine light reset itself?

The check engine light on your 2016 Hyundai Santa Fe will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going feasible, and you did assorted of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Hyundai Santa Fe light will go off after about 20-40 miles. If you drive over that fee and the light is still on, you will need to bring it in to Coggin Deland Hyundai so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a 2016 Hyundai Santa Fe?

When your check engine light comes on, this could be as easy as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a direct problem that could cause direct damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow mostly means something less direct but a flashing check engine light indicates that your vehicle’s engine is in direct trouble and service is crucial straightaway. If your check engine light is flashing in your 2016 Hyundai Santa Fe, we particularly recommend not to drive the car and schedule Hyundai service today. Below is a list of the most chummy reasons your check engine light can come on:

• Issues with any aftermarket items. An aftermarket alarm, exhaust or further item can wreak havoc on your 2016 Hyundai Santa Fe if it’s not installed properly. These aftermarket components and accessories can ditch the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound famous, bring your Santa Fe to Hyundai and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, chiefly aftermarket parts and accessories, or using OEM components first place might cost a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, admitted as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less efficient when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2016 Hyundai Santa Fe's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to indicate the right mixture of air and fuel that enters the cylinders in your engine. A harmful O2 sensor can also cause a car to fail an emissions test.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Santa Fe is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to pronounced changes, like altitude. If your Hyundai Santa Fe is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a harmful mass airflow sensor.
• Your 2016 Hyundai Santa Fe has a vacuum leak. Each Hyundai Santa Fe has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower destructive emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, chiefly if they’re exposed to intense heat or extreme freezing.
• The battery is low or dead. The battery in your 2016 Hyundai Santa Fe is each impressive. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did assorted decades ago, and they don't exactly require maintenance. The price of a new one depends on the type of Hyundai you drive, but check our current service coupons and specials.
• New Spark Plugs or Plug Wires are needed for your 2016 Hyundai Santa Fe. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are harmful or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, extensive to more expensive repairs.
• One of the most obvious and frequent cause is that your 2016 Hyundai Santa Fe gas cap is loose, damaged or missing. The gas cap for your 2016 Hyundai Santa Fe serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a harmful fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on immediately after you put gas in your 2016 Hyundai Santa Fe, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• Your catalytic converter is harmful or going harmful. The catalytic converter is a part of your 2016 Hyundai Santa Fe’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Coggin Deland Hyundai offers a complimentary multi-point inspection with each Hyundai service. If you have an issue with your catalytic converter and don't get it fixed, your 2016 Hyundai Santa Fe will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause further problems from overheating.

2016 Hyundai Santa Fe Check Engine Light Flashing

Although there are countless feasible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are a few simple causes incorporating something as simple as a loose gas cap. Alternative simple reasons for a Check Engine Light are faulty head gasket, faulty emissions control part, dirty mass airflow sensor, a malfunction with the fuel injection system, damaged oxygen sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as mandatory to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2016 Hyundai Santa Fe was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its dominant systems. The sensors are usually detecting conditions while sending data to the electronic control department. If the electronic control department detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Coggin Deland Hyundai provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Immensely Qualified Service professional.

What Does the Check Engine Light Mean?

One of the most typically misunderstood lights or indicators in your 2016 Hyundai Santa Fe is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few contrasting ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your automobile. Onboard computers increasingly have controlled and monitored automobile performance since the 80s and do a variety of things for your 2016 Hyundai Santa Fe. Some of these include controlling engine speed, shifting automatic transmissions ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can prefer a variety of different things. It can be as noticeable as your gas cap being loose or as critical as engine knocking. If your check engine light is on in your 2016 Hyundai Santa Fe, contact Coggin Deland Hyundai. Contact Coggin Deland Hyundai today! Our Hyundai service department can help you find out what code is turning your check engine light on or scan why your check engine light is flashing.

2016 Hyundai Santa Fe Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that miniature light on your vehicle’s dashboard suddenly flashes, but in reality, it is not something that should cause you to shut down in fear decent away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also appreciative as the OBD (on-board computer diagnostic system) in your Santa Fe. There are hundreds of positive codes that your check engine light can mean. While that sounds daunting, with a miniature patience, tackling big diagnostics will give you comfortable knowledge about your vehicle and will also allow that Check Engine Light to do what it is actually supposed to do: be your guide. Regrettably, positive and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of appropriate OBD codes, there are also hundreds of appropriate reasons for the light, including:

• Loose Gas Cap or Missing Gas Cap
• Bad Spark Plugs
• Old Battery
• Fuel and air metering systems problems
• Computer output circuit issues
• Ignition system faults
• O2 Sensor
• Emissions controls issues
• Transmission issues

This is why it is hard for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Coggin Deland Hyundai at 3862100263 today or schedule your check engine light service online today! If the engine light comes on due to a dangerous concern, you risk damaging your car divergent by not repairing the issue noble away. When your check engine light comes on, you should get it checked out suddenly by a certified Hyundai mechanic.