2014 Hyundai Elantra Check Engine Light Codes
The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard immediately illuminates, but in reality, it is not something that should cause you to shut down in fear feasible away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also attentive as the OBD (on-board computer diagnostic system) in your Elantra. There are hundreds of correct codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling considerable diagnostics will give you cooperative knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, correct and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of likely OBD codes, there are also hundreds of likely reasons for the light, including:
- Computer output circuit issues
- Bad Spark Plugs
- O2 Sensor
- Emissions controls issues
- Transmission issues
- Old Battery
- Fuel and air metering systems problems
- Ignition system faults
- Loose Gas Cap or Missing Gas Cap
This is why it is exciting for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out suddenly by a certified Hyundai mechanic. Call Coggin Deland Hyundai at 3862100263 today or schedule your check engine light service online today! If the engine light comes on due to a rare concern, you risk harmful your car further by not repairing the issue decent away.
What Does the Check Engine Light Mean?
One of the most customarily misunderstood lights or indicators in your 2014 Hyundai Elantra is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few contrasting ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a variety of things for your 2014 Hyundai Elantra. Some of these include controlling engine speed, shifting automatic transmissions ignition timing, and implementing stability control, just to name several. With that being said, the check engine light can mean a collection of explicit things. It can be as real as your gas cap being loose or as momentous as engine knocking. If your check engine light is on in your 2014 Hyundai Elantra, contact Coggin Deland Hyundai. Our Hyundai service department can help you read what code is turning your check engine light on or inspect why your check engine light is shining. Contact Coggin Deland Hyundai today!
Will the check engine light reset itself?
The check engine light on your 2014 Hyundai Elantra will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did various of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Hyundai Elantra light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Coggin Deland Hyundai so the light and code can be double-checked and reset.
How many miles can you drive with the check engine light?
If you check engine light is flashing, we mean that you pull over and contact Coggin Deland Hyundai to assist pick if your vehicle is reliable to drive in or if we mean a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is complicated to predict how many miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be interchanged.
2014 Hyundai Elantra Check Engine Light Flashing
Although there are plentiful likely causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are exceptional conspicuous causes consisting something as conspicuous as a loose gas cap. Distinctive conspicuous reasons for a Check Engine Light are faulty head gasket, damaged oxygen sensor, a malfunction with the fuel injection system, faulty emissions control part, dirty mass airflow sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as crucial to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.
Every 2014 Hyundai Elantra was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its relevant systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what strictly is liable nor what to do about it. That’s where we come in; Coggin Deland Hyundai provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service professional.
2014 Hyundai Elantra Check Engine Light
If the check engine light in your 2014 Hyundai Elantra starts flashing, that means that the problem needs hasty attention and your Hyundai should be brought in instantly. A flashing light indicates that the problem is draconian and if not taken care of instantly may result in big wear and tear to the vehicle. This blinking light usually illustrates a harsh engine misfire allowing unburned fuel to be jettisoned into the exhaust system. There it can hastily enhance the temperature of the catalytic converter to a point where wear and tear is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can strictly be the cause. A destructive, long-established or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a immensely expensive repair. If your check engine light is blinking, please contact our team of automotive experts at Coggin Deland Hyundai now by calling 3862100263.
Is it safe to drive your 2014 Hyundai Elantra with the check engine light on?
If the check engine light is shining, this means that there is a alarming issue and it is recommended to service your Hyundai Elantra rapidly. This question is not very uncomplicated because it each depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is mostly indicated by a consistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more direct problem. Call the experts at Coggin Deland Hyundai by dialing 3862100263 so you can describe the issues. Or reduce your speed and bring your 2014 Hyundai to our certified mechanics as soon as likely.
What could cause the check engine light to come on in a 2014 Hyundai Elantra?
When your check engine light comes on, this could be as authentic as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a perilous problem that could cause perilous damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow customarily means something less perilous but a glaring check engine light expresses that your vehicle’s engine is in perilous trouble and service is basic immediately. If your check engine light is glaring in your 2014 Hyundai Elantra, we extremely advise not to drive the vehicle and schedule Hyundai service today. Below is a list of the most conscious reasons your check engine light can come on:
- The battery is miniature or dead. The battery in your 2014 Hyundai Elantra is each noticeable. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't genuinely require maintenance. The price of a new one depends on the type of Hyundai you drive, but check our existing service coupons and specials.
- Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less practical when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2014 Hyundai Elantra's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to mean the prudent mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
- One of the most normal and frequent cause is that your 2014 Hyundai Elantra gas cap is loose, damaged or missing. The gas cap for your 2014 Hyundai Elantra serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on hastily after you put gas in your 2014 Hyundai Elantra, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
- Your 2014 Hyundai Elantra has a vacuum leak. Each Hyundai Elantra has a vacuum system that performs a wide variety of functions. The vacuum system also helps reduce harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can arid out and crack, extremely if they’re exposed to dynamic heat or extreme cold.
- New Spark Plugs or Plug Wires are basic for your 2014 Hyundai Elantra. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, dominant to more expensive repairs.
- Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2014 Hyundai Elantra’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Coggin Deland Hyundai offers a complimentary multi-point inspection with each Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your 2014 Hyundai Elantra will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause further problems from overheating.
- Issues with any aftermarket items. An aftermarket alarm, exhaust or further item can wreak havoc on your 2014 Hyundai Elantra if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound informed, bring your Elantra to Hyundai and have our squad of certified technicians ensure that your aftermarket items were installed properly and aren't causing any issue. Getting accessories, extremely aftermarket parts and accessories, or using OEM parts first place might price a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
- Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Elantra is what determines how much fuel is basic to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to actual changes, like altitude. If your Hyundai Elantra is having trouble starting, idling rough or has a quick change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
How much does it cost to get the engine light checked?
The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more rigorous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it superb to get the acceptable code reading and diagnosis. The intermediate cost for a check engine light diagnosis & testing is customarily between $88 and $111. The superb news, Coggin Deland Hyundai offers complimentary multi-point inspections and free diagnostics, in most cases, to help indicate the cause of your check engine light.
Check Engine Light Service 2014 Hyundai Elantra
What do you do when you’re driving along in your Hyundai Elantra and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the automobile over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Hyundai Elantra checked as soon as ready for use. Ignoring that warning could end up causing potent damage to expensive engine components.
When your 2014 Hyundai Elantra's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the computerized control system that it can’t good, a computer turns on your check engine light. This amber or yellow light is consistently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”
When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Hyundai auto repair mechanics at Coggin Deland Hyundai. There are also a number of relatively bargain code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced experienced to indicate the issue and repair it.