2013 Hyundai Elantra Check Engine Light

What could cause the check engine light to come on in a 2013 Hyundai Elantra?

When your check engine light comes on, this could be as prevailing as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a strict problem that could cause strict damage to your engine and come with a considerable repair bill. Depending on your make and model, the check engine light will illuminate or blink. A consistent glow customarily means something less strict but a twinkling check engine light indicates that your vehicle’s engine is in strict trouble and service is fundamental immediately. If your check engine light is twinkling in your 2013 Hyundai Elantra, we highly advise not to drive the vehicle and schedule Hyundai service today. Below is a list of the most natural reasons your check engine light can come on:

• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, established as the O2 sensor, measures the sum of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less effective when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Hyundai Elantra's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to choose the good mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a vehicle to fail an emissions test.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Elantra is what determines how much fuel is imperative to run your engine efficiently by measuring the sum of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to evident changes, like altitude. If your Hyundai Elantra is having trouble starting, idling rough or has a speedy change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
• New Spark Plugs or Plug Wires are imperative for your 2013 Hyundai Elantra. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or common, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, finest to more expensive repairs.
• Your 2013 Hyundai Elantra has a vacuum leak. Every Hyundai Elantra has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, hugely if they’re exposed to dominant heat or extreme chilled.
• Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2013 Hyundai Elantra’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Coggin Deland Hyundai offers a complimentary multi-point inspection with every Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Hyundai Elantra will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause added problems from overheating.
• The battery is low or dead. The battery in your 2013 Hyundai Elantra is every crucial. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a few decades ago, and they don't absolutely require maintenance. The estimate of a new one depends on the type of Hyundai you drive, but check our existing service coupons and specials.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or added item can wreak havoc on your 2013 Hyundai Elantra if it’s not installed correctly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound commonplace, bring your Elantra to Hyundai and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, hugely aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
• One of the most acknowledged and bountiful cause is that your 2013 Hyundai Elantra gas cap is loose, damaged or missing. The gas cap for your 2013 Hyundai Elantra serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is common or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on urgently after you put gas in your 2013 Hyundai Elantra, first thing you should check is to make courageous the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.

What Does the Check Engine Light Mean?

One of the most consistently misunderstood lights or indicators in your 2013 Hyundai Elantra is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few clear ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a mixture of things for your 2013 Hyundai Elantra. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of different things. It can be as easy as your gas cap being loose or as efficient as engine knocking. If your check engine light is on in your 2013 Hyundai Elantra, contact Coggin Deland Hyundai. Contact Coggin Deland Hyundai today! Our Hyundai service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing.

2013 Hyundai Elantra Check Engine Light Flashing

Although there are copious attainable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several receptive causes encompassing something as commonplace as a loose gas cap. Contrasting receptive reasons for a Check Engine Light are dirty mass airflow sensor, faulty emissions control part, a malfunction with the fuel injection system, faulty head gasket, damaged oxygen sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as mandatory to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2013 Hyundai Elantra was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its crucial systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what absolutely is erroneous nor what to do about it. That’s where we come in; Coggin Deland Hyundai provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service professional.

2013 Hyundai Elantra Check Engine Light

If the check engine light in your 2013 Hyundai Elantra starts flashing, that means that the problem needs urgent attention and your Hyundai should be brought in urgently. A flashing light suggests that the problem is relentless and if not taken care of urgently may result in gargantuan damage to the vehicle. This blinking light commonly indicates a strict engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can suddenly increase the temperature of the catalytic converter to a point where break is feasible, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can really be the cause. A bad, historic or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is flashing, please contact our team of automotive experts at Coggin Deland Hyundai hastily by calling 3862100263.

Check Engine Light Service 2013 Hyundai Elantra

What do you do when you’re driving along in your Hyundai Elantra and suddenly, a yellow light brightens on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a tiny because you have tiny idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t illustrate you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Hyundai Elantra checked as soon as possible. Ignoring that warning could end up causing gargantuan damage to expensive engine components.

When your 2013 Hyundai Elantra's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t honest, a computer turns on your check engine light. This amber or yellow light is regularly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic audit tool that is used by our Hyundai auto repair technicians at Coggin Deland Hyundai. There are also a number of relatively good code readers that are designed for do-it-yourselfers, should you opt for that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to mean the issue and repair it.

2013 Hyundai Elantra Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard expeditiously brightens, but in reality, it is not something that should cause you to shut down in fear honorable away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also acknowledged as the OBD (on-board computer diagnostic system) in your Elantra. There are hundreds of discrete codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling considerable diagnostics will give you beneficial knowledge about your automobile and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, overt and cogent automobile symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of cogent OBD codes, there are also hundreds of cogent reasons for the light, including:

• Old Battery
• Bad Spark Plugs
• Computer output circuit issues
• Transmission issues
• Emissions controls issues
• O2 Sensor
• Loose Gas Cap or Missing Gas Cap
• Fuel and air metering systems problems
• Ignition system faults

This is why it is important for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Coggin Deland Hyundai at 3862100263 today or schedule your check engine light service online today! If the engine light comes on due to a hazardous concern, you risk damaging your automobile other by not repairing the issue noble away. When your check engine light comes on, you should get it checked out expeditiously by a certified Hyundai mechanic.

Is it safe to drive your 2013 Hyundai Elantra with the check engine light on?

This question is not very understandable because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is typically indicated by a consistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more critical problem. If the check engine light is blinking, this means that there is a critical issue and it is recommended to service your Hyundai Elantra suddenly. Call the experts at Coggin Deland Hyundai by dialing 3862100263 so you can describe the issues. Or reduce your speed and bring your 2013 Hyundai to our certified mechanics as soon as factual.

How much does it cost to get the engine light checked?

The intermediate cost for a check engine light diagnosis & testing is commonly between $88 and $111. The satisfactory news, Coggin Deland Hyundai offers complimentary multi-point inspections and free diagnostics, in most cases, to help read the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not correctly tightened to a more hazardous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it satisfactory to get the suitable code reading and diagnosis.

Will the check engine light reset itself?

The check engine light on your 2013 Hyundai Elantra will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going sane, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Hyundai Elantra light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Coggin Deland Hyundai so the light and code can be double-checked and reset.

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is stern to predict how several miles you can drive with the warning light on. It could be anything from a detrimental sensor to plug wires needing to be interchanged. If you check engine light is flashing, we recommend that you pull over and contact Coggin Deland Hyundai to help indicate if your vehicle is reliable to drive in or if we recommend a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly.