Please wait while the page loads...

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. It could be anything from a destructive sensor to plug wires needing to be replaced. If you check engine light is flashing, we recommend that you pull over and contact Coggin Deland Hyundai to assist illustrate if your vehicle is capable to drive in or if we recommend a tow truck.

Will the check engine light reset itself?

The check engine light on your 2013 Hyundai Accent will frequently shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Hyundai Accent light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to transport it in to Coggin Deland Hyundai so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a 2013 Hyundai Accent?

When your check engine light comes on, this could be as prudent as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a severe problem that could cause severe wear and tear to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A logical glow commonly means something less severe but a shining check engine light indicates that your vehicle’s engine is in severe trouble and service is fundamental abruptly. If your check engine light is shining in your 2013 Hyundai Accent, we highly advise not to drive the vehicle and schedule Hyundai service today. Below is a list of the most daily reasons your check engine light can come on:

  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, acknowledged as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less accessible when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Hyundai Accent's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to indicate the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2013 Hyundai Accent’s exhaust system. The catalytic converter's perform is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Coggin Deland Hyundai offers a complimentary multi-point inspection with every Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Hyundai Accent will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause alternative problems from overheating.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or alternative item can wreak havoc on your 2013 Hyundai Accent if it’s not installed properly. These aftermarket parts and accessories can dump the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound acknowledged, bring your Accent to Hyundai and have our department of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts earliest place might rate a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • New Spark Plugs or Plug Wires are needed for your 2013 Hyundai Accent. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires bring the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or common, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, first-rate to more lavish repairs.
  • The battery is low or dead. The battery in your 2013 Hyundai Accent is every exceptional. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Hyundai you drive, but check our ongoing service coupons and specials.
  • One of the most effortless and countless cause is that your 2013 Hyundai Accent gas cap is loose, damaged or missing. The gas cap for your 2013 Hyundai Accent serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is common or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't lavish. If your check engine light turns on hastily after you put gas in your 2013 Hyundai Accent, earliest thing you should check is to make hopeful the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your 2013 Hyundai Accent has a vacuum leak. Every Hyundai Accent has a vacuum system that performs a roomy variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to intense heat or extreme cold.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Accent is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to genuine changes, like altitude. If your Hyundai Accent is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.

2013 Hyundai Accent Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also acknowledged as the OBD (on-board computer diagnostic system) in your Accent. There are hundreds of alternative codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling basic diagnostics will give you available knowledge about your vehicle and will also allow that Check Engine Light to do what it is explicitly supposed to do: be your guide. Unfortunately, fascinating and superb vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of compelling OBD codes, there are also hundreds of compelling reasons for the light, including:

  • Transmission issues
  • Emissions controls issues
  • Bad Spark Plugs
  • Old Battery
  • Fuel and air metering systems problems
  • Computer output circuit issues
  • O2 Sensor
  • Ignition system faults
  • Loose Gas Cap or Missing Gas Cap

This is why it is paramount for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Coggin Deland Hyundai at 3862100263 immediately or schedule your check engine light service online today! If the engine light comes on due to a applicable concern, you risk damaging your car further by not repairing the issue right away. When your check engine light comes on, you should get it checked out abruptly by a certified Hyundai mechanic.

2013 Hyundai Accent Check Engine Light

If the check engine light in your 2013 Hyundai Accent starts blinking, that means that the problem needs abrupt attention and your Hyundai should be brought in instantly. A blinking light expresses that the problem is important and if not taken care of instantly may result in large damage to the vehicle. This shining light usually indicates a stern engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can hastily boost the temperature of the catalytic converter to a point where damage is conceivable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can strictly be the cause. A bad, erstwhile or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very fancy repair. If your check engine light is shining, please contact our unit of automotive veterans at Coggin Deland Hyundai immediately by calling 3862100263.

What Does the Check Engine Light Mean?

One of the most normally misunderstood lights or indicators in your 2013 Hyundai Accent is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few divergent ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a assortment of things for your 2013 Hyundai Accent. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of explicit things. It can be as pure as your gas cap being loose or as threatening as engine knocking. If your check engine light is on in your 2013 Hyundai Accent, contact Coggin Deland Hyundai. Our Hyundai service department can assist you find out what code is turning your check engine light on or diagnose why your check engine light is blinking. Contact Coggin Deland Hyundai today!

Check Engine Light Service 2013 Hyundai Accent

What do you do when you’re driving along in your Hyundai Accent and swiftly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a miniature because you have miniature idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the price of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t determine you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Hyundai Accent checked as soon as conceivable. Ignoring that warning could end up causing dominant damage to expensive engine components.

When your 2013 Hyundai Accent's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t relevant, a computer turns on your check engine light. This amber or yellow light is constantly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic observe tool that is used by our Hyundai auto repair mechanics at Coggin Deland Hyundai. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an professional high-tech to designate the issue and repair it.

2013 Hyundai Accent Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are plentiful accepted causes incorporating something as classic as a loose gas cap. Back-up accepted reasons for a Check Engine Light are a malfunction with the fuel injection system, faulty emissions control part, faulty head gasket, damaged oxygen sensor, dirty mass airflow sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as fundamental to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2013 Hyundai Accent was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its vivid systems. The sensors are continually detecting conditions while sending data to the electronic control company. If the electronic control company detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what strictly is untrue nor what to do about it. That’s where we come in; Coggin Deland Hyundai provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extraordinarily Qualified Service technological.

Is it safe to drive your 2013 Hyundai Accent with the check engine light on?

If the check engine light is flashing, this means that there is a unhealthy issue and it is recommended to service your Hyundai Accent quickly. This question is not very noticeable because it each depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be protected to drive. This is naturally indicated by a steady glow of the check engine light. If you notice a difference in the performance of the automobile, it could be an indication of a more unsafe problem. Call the experts at Coggin Deland Hyundai by dialing 3862100263 so you can describe the issues. Or reduce your speed and bring your 2013 Hyundai to our certified mechanics as soon as achievable.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is commonly between $88 and $111. The good news, Coggin Deland Hyundai offers complimentary multi-point inspections and free diagnostics, in most cases, to help elect for the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not correctly tightened to a more exacting failure like a damaging catalytic converter or a problem with one of the car's oxygen sensors, so it good to get the polite code reading and diagnosis.