2012 Hyundai Santa Fe Check Engine Light

2012 Hyundai Santa Fe Check Engine Light Flashing

Although there are plentiful conceivable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are bountiful regular causes including something as simple as a loose gas cap. Other regular reasons for a Check Engine Light are faulty emissions control part, damaged oxygen sensor, dirty mass airflow sensor, a malfunction with the fuel injection system, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as basic to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2012 Hyundai Santa Fe was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its critical systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Coggin Deland Hyundai provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Largely Qualified Service professional.

Will the check engine light reset itself?

The check engine light on your 2012 Hyundai Santa Fe will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2012 Hyundai Santa Fe light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Coggin Deland Hyundai so the light and code can be double-checked and reset.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more draconian failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it extensive to get the appropriate code reading and diagnosis. The middle cost for a check engine light diagnosis & testing is generally between $88 and $111. The extensive news, Coggin Deland Hyundai offers complimentary multi-point inspections and free diagnostics, in most cases, to help indicate the cause of your check engine light.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2012 Hyundai Santa Fe is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a mixture of things for your 2012 Hyundai Santa Fe. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name assorted. With that being said, the check engine light can mean a variety of different things. It can be as natural as your gas cap being loose or as applicable as engine knocking. If your check engine light is on in your 2012 Hyundai Santa Fe, contact Coggin Deland Hyundai. Our Hyundai service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Coggin Deland Hyundai today!

Is it safe to drive your 2012 Hyundai Santa Fe with the check engine light on?

If the check engine light is shining, this means that there is a admissible issue and it is recommended to service your Hyundai Santa Fe shortly. This question is not hugely classic because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is continuously indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more admissible problem. Call the experts at Coggin Deland Hyundai by dialing 3862100263 so you can describe the issues. Or reduce your speed and bring your 2012 Hyundai to our certified mechanics as soon as convenient.

Check Engine Light Service 2012 Hyundai Santa Fe

What do you do when you’re driving along in your Hyundai Santa Fe and suddenly, a yellow light lights up on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2012 Hyundai Santa Fe checked as soon as probable. Ignoring that warning could end up causing fundamental damage to expensive engine elements.

When your 2012 Hyundai Santa Fe's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t essential, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electrical scan tool that is used by our Hyundai auto repair mechanics at Coggin Deland Hyundai. There are also a number of somewhat inexpensive code readers that are designed for do-it-yourselfers, should you select that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an licensed licensed to select the issue and repair it.

What could cause the check engine light to come on in a 2012 Hyundai Santa Fe?

When your check engine light comes on, this could be as straightforward as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a risky problem that could cause risky wear and tear to your engine and come with a hefty repair bill. Depending on your make and model, the check engine light will illuminate or blink. A convincing glow typically means something less risky but a flashing check engine light indicates that your vehicle’s engine is in risky trouble and service is needed immediately. If your check engine light is flashing in your 2012 Hyundai Santa Fe, we remarkably mean not to drive the car and schedule Hyundai service now. Below is a list of the most natural reasons your check engine light can come on:

• The battery is low or dead. The battery in your 2012 Hyundai Santa Fe is every extraordinary. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did several decades ago, and they don't really require maintenance. The price of a new one depends on the type of Hyundai you travel to work, but check our current service coupons and specials.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Santa Fe is what determines how much fuel is needed to run your engine efficiently by measuring the ditch of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to actual changes, like altitude. If your Hyundai Santa Fe is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
• One of the most prevalent and countless cause is that your 2012 Hyundai Santa Fe gas cap is loose, damaged or missing. The gas cap for your 2012 Hyundai Santa Fe serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on expeditiously after you put gas in your 2012 Hyundai Santa Fe, first thing you should check is to make positive the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or additional item can wreak havoc on your 2012 Hyundai Santa Fe if it’s not installed properly. These aftermarket parts and accessories can discard the battery, trigger the check engine light, or even hinder the car from starting. If these issues sound cordial, bring your Santa Fe to Hyundai and have our company of certified mechanics ensure that your aftermarket items were installed perfectly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might rate a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
• Your 2012 Hyundai Santa Fe has a vacuum leak. Every Hyundai Santa Fe has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower damaging emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can barren out and crack, especially if they’re exposed to profound heat or extreme cold.
• Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2012 Hyundai Santa Fe’s exhaust system. The catalytic converter's work is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is frequently caused by neglected maintenance, which is why Coggin Deland Hyundai offers a complimentary multi-point inspection with every Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your 2012 Hyundai Santa Fe will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause additional problems from overheating.
• New Spark Plugs or Plug Wires are needed for your 2012 Hyundai Santa Fe. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your car. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, leading to more expensive repairs.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the ditch of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your car will be less available when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2012 Hyundai Santa Fe's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to indicate the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be changed. Since each check engine code has its own level of severity, it is dominant to predict how copious miles you can commute with the warning light on. The safest bet is to decipher the code and then plan your strategy subsequently. If you check engine light is shining, we advocate that you pull over and contact Coggin Deland Hyundai to help learn if your vehicle is capable to commute in or if we advocate a tow truck.

2012 Hyundai Santa Fe Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Santa Fe. There are hundreds of further codes that your check engine light can pick. While that sounds daunting, with a little patience, tackling crucial diagnostics will give you accessible knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, clear-cut and essential vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of viable OBD codes, there are also hundreds of viable reasons for the light, including:

• Loose Gas Cap or Missing Gas Cap
• Ignition system faults
• O2 Sensor
• Computer output circuit issues
• Transmission issues
• Emissions controls issues
• Fuel and air metering systems problems
• Old Battery
• Bad Spark Plugs

This is why it is vital for someone who does not have copious of automotive knowledge to not assume what a code means. Call Coggin Deland Hyundai at 3862100263 today or schedule your check engine light service online today! If the engine light comes on due to a hazardous concern, you risk bad your vehicle further by not repairing the issue right away. When your check engine light comes on, you should get it checked out straightaway by a certified Hyundai mechanic.

2012 Hyundai Santa Fe Check Engine Light

If the check engine light in your 2012 Hyundai Santa Fe starts flashing, that means that the problem needs immediate attention and your Hyundai should be brought in rapidly. A flashing light expresses that the problem is adequate and if not taken care of rapidly may result in giant damage to the vehicle. This blinking light ordinarily indicates a draconian engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can quickly boost the temperature of the catalytic converter to a point where damage is conceivable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can really be the cause. A bad, long-established or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is twinkling, please contact our team of automotive experts at Coggin Deland Hyundai promptly by calling 3862100263.